All three are a steady, random rush of sound with no tune and no beat. What changes is how the energy is shared out between high and low pitches. That is why white noise sounds bright, pink noise sounds rounder and brown noise sounds like a deep roar.
Why sounds are named after colors
The names borrow from light. White light holds every frequency of visible light at roughly the same strength. So a sound that holds every frequency we can hear at the same strength came to be called white noise, and the other colors followed by loose comparison.
Two words help with the rest. Frequency is what your ear hears as pitch: a high frequency is a high note, a low frequency a low one. An octave is a doubling of frequency, like the jump from the A above middle C on a piano to the next A up.
White noise: the bright hiss
White noise gives every frequency an equal share. To most ears it comes across as a sharp, high hiss. Britannica names the static between stations on an FM radio as a close everyday match. If you remember the snow on an old analog TV, its "shhh" was much the same.
Pink noise: in between
Pink noise takes some of the edge off. Its strength drops by about 3 decibels each time you go up an octave, which works out to the same amount of energy in every octave. The top end is quieter than in white noise, so the lower sounds come forward.
To the ear, pink sits between the other two, with less hiss than white and less rumble than brown. Sound engineers use it as a test signal when they check rooms, concert halls and sound systems.
Brown noise: the low roar
Brown noise leans further toward the bass. Its strength falls by about 6 decibels per octave, twice as steeply as pink noise. What you hear is a low, rumbling sound that people often compare to a waterfall, heavy rain or thunder far away.
The name has nothing to do with the color brown. It comes from Brownian motion, the random jiggling of tiny particles described by Robert Brown, a Scottish botanist of the 19th century. You may also see brown noise called red noise.
What the decibel numbers do not tell you
The 3 and 6 decibel figures describe the shape of each sound, meaning how fast the high end fades next to the low end. They are not a volume setting and say nothing about how loud to play anything. For questions about sound levels in a nursery, or about your baby's hearing or sleep, please talk to your pediatrician.
If you would like to hear the difference, several baby sound apps offer all three. Our guide to the best white noise apps for babies compares a handful side by side.